Easy Pulse 5 - Oxygen Regulator
PART NUMBER: 198705
Easy Pulse 5 - Oxygen Conserving Regulator
The Oxygen Conserver is designed to be used with high-pressure oxygen systems. It consists of a cylinder connection, cylinder contents gauge, high to low pressure regulator, orifice plate and a conserving demand module. The regulator reduces the high pressure of the cylinder to the working pressure of the orifice plate. The orifice place uses calibrated orifices to deliver a selected flow to the conserving demand module. The conserving demand module controls the pulse size and timing of the patient. It supplies a pulse of oxygen at the beginning of each breath. This reduces the oxygen demand on the system and limits the drying of the airways. The flow is determined by setting the flow control knob to the prescribed flow. The oxygen is supplied to the patient through the cannula.
Specifications:
Inlet Pressure Range: 300-30000 PSI (2068 – 20684 kPa)
Internal Regulated Pressure: 50 PSI (345 kPa)
Pressure Gauge Accuracy: 3 – 2 – 3% of Full Scale
Dimensions:
- Weight: 279g (9.9oz)
- Overall Length: 12.07cm (4.75in)
- Width: 6.67cm (2.63in)
- Height: 6.34cm (2.50in)
Pulse Settings: 1, 2, 3, 4 & 5 LPM Equivalents
Flow Settings: 2 LPM Continuous
Accuracy: Within +/- 15% of the nominal bolus value (at each breath rate)
Continuous Setting: 2 LPM ± 10%
Savings Ratio: Up to 5.7:1
Trigger Method: Inspiratory Effort (Negative Pressure from Patient Inhalation)
Breathing Frequency: Up to 35 BPM
Cannula Requirement: Maximum 2.1m (7.1ft) long standard adult single lumen nasal cannula
Operating Conditions:
- Temperature: 1.7°C to 40.6°C (35°F to 105°F)
- Altitude: Sea Level to 0 to 3,048m (10,000ft)
Storage Conditions:
- Temperature: -40°C to 60°C (-40F° to 140°F)
- Maximum Humidity: 95% Non-condensing
Oxygen Cylinder Connection: CGA 870 Valve
Ignition and Fault Tolerance: Meets ASTM G175-03
